Click on the image below to see the full newsletter online:
Visit www.smbbearings.com for information on our bearings for hobby & industrial use...
Thursday, 28 July 2016
Thursday, 21 July 2016
Ian Emery, RC heli pilot - season update
 |
| The competitors line up for the Euro Heli Series... |
We've just received this fantastic in-depth season update from our friend & RC Heli pilot Ian Emery, it's a great insight into the pressures of reaching the international competition Euro Heli Series & also World Cup standard:
"I just thought I would give you a quick update on everything
that has happened over the winter and the Season so far. The beginning of the year was a right-off
with regards to flying helicopters as I had to go away with work for 4 months
which couldn’t have come at a worse time (ed. Ian spent a very chilly few months in the Falklands!).
When I returned at the beginning of May I had a shiny new JR Sylphide to try and get built and set up ready for the first F3C Competition. This is pretty much the same model as I flew last year except this one is fitted with the beautiful JR Super Gracy fuselage and a slightly different rotor head which has proved to be popular amongst other F3C pilots.
 |
| Ian carries his heli into battle (this picture gives you a real feel for the sheer size of these machines)... |
This was going to be an
important season for me but I couldn’t help but feel frustrated that I had done
so little flying with being away and I just wanted to look back and say that I
had given it my all. To add to my workload I had 2 new schedules to learn which
looked challenging to get right. On a
positive note I now had 2 very capable helicopters and it was just the pilot
that needed sorting out!
 |
| Ian in action... |
The month soon passed and it was time to travel up to
Aberdeen for the Scottish Heli Nats and my first Competition of the 2016
Season. I was understandably a little
nervous because I had done so little flying since the end of last season and I
had a slight mishap following an auto-rotation during training where the
helicopter tipped onto its side causing minor damage to the fuselage a week
earlier. We were really lucky with the weather and managed to get 3 rounds
completed along with plenty of training flights which all proved really useful
in my work-up to the F3C World Cup competitions and European
Championships. A lot of competition
flying is physiological and for some reason I managed to make a mistake during
the rolling manoeuvre which carried on into subsequent rounds, but I knew it
was all in my head and Team manager, Mike Gilfillan was on hand to talk me out
of it. I managed to finish 3rd which I was pleased with but felt
like I had lost ground on teammate and good friend Roger Mayo after some very
close battles last year.
With no time to contemplate things the following week we
made the journey to Almere in Holland. This was a fantastic venue for the first
ever FAI F3C World Cup competition and forms part of the Euro Heli Series which
is now in its 3rd year. We had a pretty good attendance with 14
pilots from 5 different countries. After
3 rounds of the preliminary schedule and 2 rounds of the Fly-off schedule I
managed to finish 9th place and secured 6 valuable World Cup points.
To explain a little bit, other FAI radio controlled disciplines have held World
Cup’s for several years and it involves countries from around the World hosting
World Cup events, points are then awarded after each event depending where you
finished for that competition. You then
submit your best 3 results to form a World League table. For F3C this is the first World Cup season
but I think it will gather momentum over the next few years but I was really
happy to have been a part of the first ever F3C World Cup competition. We then had a 3 week break which I was hoping
to get some much needed practice, unfortunately between work and the weather my
opportunities to get out flying were extremely limited.
The second Euro Heli Series and World Cup competition was
held in Haaltert in the heart of Belgium at the Little Wings club. In the 2 previous years we have had major
problems with the Belgium competition due to rain, really strong winds or a
combination of both. This year we had changed the date, changed the venue but
we were not to be disappointed as it rained hard most of the weekend. Two weeks on and I think my boots are still
drying out. We were also discussing
ideas on how to fit floatation devices to the helicopters is was that wet. Surprisingly between the downpours we still
managed to fit in 5 complete rounds over the weekend and I finished 9th again
and another 6 World Cup points.
 |
| A bit of maintenance "on the fly"! |
As I write this I only have a few days before I leave to go
the European Championships in Poland, which will be my first major continental
championship. Both helicopters are good
to go although I popped into SMB Bearings the other day to pick up a spare set
of bearings just in case. Interestingly I stripped the motor down on the
helicopter I used last year. The motor
manufacturer recommends oiling the bearings every 5-6 flights. The helicopter had well over 200 flight last
year using Japanese EZO bearings supplied by SMB and they are still as good as
the day I fitted them, which is a testament to how good these bearings are. Not
oiling the bearing has meant that the grease applied during the manufacturing
process has stayed in place and not been flushed out.
I know I always say it but thank you to the whole team at
SMB Bearings for the continued support that you have given me over years; it
really makes my life easier knowing I have such reliable bearings installed on
my helicopters".  |
| Ian on a recent visit to SMB... |
If you think you'd like to get into RC Heli competitions there are lots of online resources available - for example
http://www.euroheliseries.net/
http://www.helinats.co.uk/
And the BMFA/AHA's website http://BMFA.org/AHA might be a good place to start.
Of course, if you need replacement bearings for your pride & joy too,
we'll be delighted to help you with that!
Subscribe to:
Posts (Atom)