Showing posts with label SMB bearings. Show all posts
Showing posts with label SMB bearings. Show all posts

Tuesday, 3 February 2015

Joe Baldwin bags first place at Fumble in the Valley...

Our friend Joe Baldwin was in action at the weekend, racing in Welsh downhill competition Fumble In The Valley...


Joe says:
"I took first place at the first UK race of the year in Wales this weekend!  Racing in a blizzard!!
Horse poo, grit & ice haven't managed to cease your bearings"
Joe styles it out on the podium (pub chair) top spot! Photo by willedgecom.be
Thanks for the big up Joe - I have to stress, we don't normally recommend horse poo, grit & ice as the optimum conditions for bearings maintenance!!  If you'd like to learn how to clean your skate bearings after a hellish weekend's action on the slopes, click here & read on...

In other news, the international sensation & superstar Marie Bougourd (aka SpokyWoky) came second at the famous Guajataca Downhill race in Puerto Rico last weekend - an amazing way to kick of the 2015 race season... you GO girl!!

Spoky Woky (far right) at the starting line in Puerto Rico last weekend


Tuesday, 9 December 2014

SMB Bearings pre-Christmas delivery update...


Don't let the pre-Christmas post delays disrupt your orders! 

There are severe seasonal delays to all Royal Mail services & the last posting dates for Eastern Europe have now passed (& are fast approaching for Western Europe & the UK) but SMB Bearings still have a range of options to get your orders to you next day, or within a few days.  Spending just a fraction more now can save a whole heap of frustration later (especially as 1st class post/airpost services are not trackable)!

Please contact us before submitting your order & we'll advise you on a whole range of delivery options.

Monday, 8 December 2014

Photo of the day - featuring Joe Baldwin & Aaron Skippings...

Joe Baldwin (left) & Aaron Skipping (right) - gosh darn it they're lush aren't they?!!

Check out this awesome image of our two favourite gents, chilling out after Pike's Peak,
 in their BTR leathers.   At SMB Bearings, we are very pleased to grace such finely-honed legs - chiseled by years of downhill skating! It is also very nice to see some sunshine (as we're officially in bleak mid-winter phase now) :-)

Friday, 28 November 2014

How do bearings work? An animated guide...





This cool little video explains to budding techies how the use of radial ball bearings & specifically the steel balls inside them can decrease friction and increase efficiency in a bearing, allowing a wheel, or other spinning component, to spin freely.  

If you'd like to see more technical information on bearings, please visit our website's technical pages, which are jam-packed with useful information on a range of topics & includes advice on material selection, bearing fit, lubrication & much more...


Monday, 24 November 2014

Latest from Aaron Skippings, downhill skater...

Aaron in action in California earlier this year

We had a lovely message from our friend Aaron Skippings at the weekend:

"I wanted to say a massive "thank you" to SMB for helping me so much this year and I am so grateful!   It's done a lot for me and helped me skate as fast as i can! Looking forward to next year!" 

Thanks Aaron!  We are so glad that our skate bearings have helped your 2014 downhill skate season to go with & bang & we can't wait to see how you progress in 2015.



Monday, 4 August 2014

Cool use of bearings, in a 3D printed watch!

Bearings are often used in clock making & here's a beautiful, 3D printed example,
]created by Nicholas Manousos.


Of the bearings, Nicholas says:
"The ball bearings are the only movement part not made in house. At the large scale I work with it makes most sense to use ball bearings rather than traditional jewels. I experimented with printing jewels using high-strength polymers with acceptable results but found ball bearings to perform much better".


Tuesday, 15 July 2014

Ian Emery, RC Helicopter pilot, competition update...

SMB Bearings have been friends (& fans) of Ian Emery for over two years now - the RC Heli pilot shares his F3C season update with us here:



"With a short break in the competition season I thought I would take the chance to let you know how I have been getting on.  This is my first year in F3C having moved up from Sportsman’s so I knew that this year was going to be a big challenge.

The first Competition of the year was held at Lendelede, Belgium over the weekend of 10/11 May 14. We got there nice and early on the Friday hoping to get some much needed practice in before the Competition started on the Saturday.  It turned out that you can plan everything down to the last letter but you can never rely on the weather.  
 


We were greeted by very strong winds with gusts of 38mph, not the ideal way to start my journey in F3C.  We all decided that it would probably be better not to fly so that we had a helicopter left to fly for the Competition.  Unfortunately the weather was extreme to say the least for the remainder of the weekend.  Somehow I managed to be drawn out of a hat to fly the calibration flight (this is to make sure the judges singing off the same hymn sheet).  A mixture of the weather and nerves my calibration flight was awful.  

Thankfully I managed to recover and put in a half descent round for my first round.  The second round, the wind had got worse again and it was touch and go whether we should stop flying. The wind was just inside the limits imposed by the FAI so it was voted on that we should continue.  Trying to keep the model still for the hovering manoeuvres was a nightmare, I decided to try the Aerobatic part of the schedule but it was just too much for me so I came in to land and save the model.  The final round on the Sunday was a little better.  Some of the flying by the other pilots was exceptional, especially the World Junior Champion Pierre Gutierrez and Arnaud Poyet from France and Steve Roberts from the UK.  I eventually finished 14th, but learnt some very valuable things over the course of the weekend.


The next completion was the Scottish Heli Nats just south of Aberdeen at the beginning of June.  Thankfully the weather was much better.  The whole weekend was very enjoyable as always.  I was doing quite well with my flying also lying in 3rd place going into the last round.  For some reason I had a mental block going into the penultimate manoeuvre putting in all of the wrong collective inputs to compensate for the wind earning myself a big fat Zero for that manoeuvre dropping me down to 5th.  It finished very close with only a few points splitting 3rd to 5th. Very disappointing from my perspective but these things happen and hopefully you learn from them and move on.  



The following weekend we made the long trip to Toldijk in the Netherlands for the second round of the Euro Heli Series.  Everything was looking good for a good weekend - a beautiful setting, fantastic weather and amazing hosts.  I felt as though I was really starting to get somewhere with my flying and my model setup,  managing to put in 3 good rounds on the Saturday leaving me in 6th.  There are always areas for improvement but I was happy knowing that there was just 1 more round to fly on the Sunday.  I dropped one place after the round on Sunday but was very happy to finish 7th but from a personal view my scores have steadily been improving throughout the 3 competitions.  


By time we had got home we had travelled over 2000 miles in just 10 days and was very much in need of a break."

Thanks for the update Ian, what an amazingly busy season so far!  We'll bring you more news on Ian's escapades as the season progresses.

Friday, 11 July 2014

SMB's bearings are helping to style the world's hair...

Our bearings are being used in hair stylers - how exciting!!!


As you know, we love hearing where our bearings end up & one of our lovely customers has just advised us that they have developed a curler/styling product for a very well know retail hair-care brand (we've been sworn to secrecy over which one) & our bearings are an integral part of the end-product.  

****



Friday, 20 June 2014

Ron Flemming & his morse code keyer machine...

We had such an exciting visit today from our lovely customer , Mr Ron Flemming.  He's been visiting us recently (to get bearings to repairs his grandchildren's scooters) & on his last visit Ron mentioned a prize winning project he'd created, using our bearings. 

Prize winner (& awesome customer) Ron Flemming, pictured with some of his trophies 
We always love seeing what our inventive customers use our bearings for, so we were a bit cheeky & asked if he'd be able to send us a picture of the morse-code keying machine that he'd painstakingly built by hand in his workshop.  

You can imagine our delight then, when he turned up with this today:


"Hi, As promised  I have attached  some photos of a morse code keyer shown in various stages of construction,  that I built  using your small bearings SR144ZZ.

I am a licenced Radio Amateur with the call sign of "G0 BNC".
The morse keyer was built using scrap materials, plus your Bearings. The keyer is completely  my own design, and  can be used as 3 separate types of keyers.  As far as I am aware there is not a keyer available commercially that can do this. 

Materials used are:
  • Base: oak over 50 years in my possession...

  • Alloy Arms: scrap window frame,   


Finger Keys and Front Arm:  are from a used electronic printed circuit board,  Transmitting Contacts: cut from a electrical relay, then soldered onto the end of brass bolts,   

  • Key Adjusters:  brass screws, brass screw cup washers, compression springs. 


  • The Electronics and Batteries are cut into the base, and Speaker is under the arms.
  • Plus your SR144ZZ bearings that 2 top ones can be seen with  1/8”brass brazing rod centre pivot pins with brass screw cups on the tops.

  
With this I won the 2012 annual construction  contest. The entries normally have only a few votes separating the first, second, third places, but one of the adjudicators advised me I received well over 50% of the votes. To make it better still, an ex military  operator advised me it`s as good as his expensive keys, and another friend paid over £1000  for his, and the difference is hardly noticeable. One of the reasons is because of the smooth operation of the bearings. One problem I found was because they are so small and smooth, I lost a few between the garage and house (they rolled so well)!



There are a few pics of the cup/trophy to keep, and the annual trophy that is kept for one year with a tag fitted with previous  winners details. (also in pic is the annual new years day direction finding trophy which I won, then  the annual construction contest in February. The main  trophy was donated by the family of G2HIF  who was one of the leading pioneer designers of radar detection systems.


Thank you for your excellent and knowledgeable  friendly service.  Kind Regards,  Ron Flemming."

 Well, Ron - what can we say, apart from thank you, thank you, thank you!  
It is such a delight to see our bearings in use & especially so when they have been used in such a unique way. Ron Flemming is truly a home-build star & obviously a force to be reckoned with in the world of engineering.




Monday, 2 June 2014

Busy downhill weekend...

Some of our friends have obviously had a busy weekend... :-)

Awesome pic of downhill adventures by Philippe Dupuy

And Spoky Woky (aka Marie Bougourd) getting ready to ride before Sunday lunch...
Aaron Skippings hitching a ride on Rob Borek's board at the weekend (photo by Erik Derycke) 

Friday, 16 May 2014

Bearing Lubrication - the importance of lubricant selection for ball bearings

You may not have given it much thought, but what's inside your bearing can be crucial to it's future survival...


When a bearing must perform under demanding conditions, the lubricant selection becomes critical. Lubrication will affect life, torque, speed, noise, grease migration out gassing, temperature and rust prevention of the bearing.

Two basic types of lubricants available are oil and grease.

Applications that require extremely low torque or narrow range of torque variation are suited to use oil as a lubricant. Depending on the application, it is possible that an oil lubricant may not meet a specific requirement. Grease is an oil to which a thickener has been added.

A technician adds oil lubricant to a bearing

Oil

Oil is the basic lubricant for ball bearings. Previously most lubricating oil was refined from petroleum. Today, however, synthetic oils such as diesters, silicone polymers, and fluorinated compounds have found acceptance because of improvements in properties.
Compared to petroleum base oils, diesters in general have better low temperature properties, lower volatility, and better temperature/viscosity characteristics. Silicones and fluorinated compounds possess even lower volatility and wider temperature/viscosity properties.

Grease

Grease is an oil to which a thickener has been added to prevent oil migration from the lubrication site. It is used in situations where frequent replenishment of the lubricant is undesirable or impossible. All of the oil types mentioned here can be used as grease bases to which are added metallic soaps, synthetic fillers and thickeners.
The operative properties of grease depend almost wholly on the base oil. Other factors being equal, the use of grease rather than oil results in higher starting and running torque and can limit the bearing to lower speeds.
Grease additives include rust inhibitors, extreme pressure additives (EP), oxidation preventatives, etc. Because of the wide variety and complexity of additives, the characteristics of similar greases change considerably from one manufacturer to another.
Some of our grease lubricant

And just when you think you've got the hang of it, there are also:

Dry Lubricants 
Used primarily in vacuum applications or where standard lubricants are unsuitable. AT SMB we use graphite based dry lubricants and also molybdenum disulfide for their hardwearing and low friction properties and the fact that they insoluble in water and dilute acids. It is also effective within a wide temperature range of -180 to +300°C.   

Molybdenum disulfide powder - before it is applied
By burnishing the balls and raceways of a bearing, friction is reduced allowing higher speeds than with dry bearings. This also gives improved performance in vacuum applications.


At SMB we take lubricant selection very seriously & all our bearings come lubricated as standard with high quality lubrication. We can also assist with specialist lubrication requirements, using our on-site re-lubrication facilities - to handle everything from food safe applications to low torque conditions. We regularly supply our bearings or the customers' own bearings with:
  • dampening greases 
  • dry lubricants 
  • food safe greases 
  • high temperature lubricants 
  • low temperature lubricants 
  • low torque lubricants 
  • molybdenum disulphide coating 
  • perfluorinated lubricants 
  • radiation-resistant lubricants 
  • vacuum lubricants 
  • waterproof greases
Please contact us if you'd like any more information about the re-lubrication of your bearings.

Wednesday, 14 May 2014

Touch Bionics hitting the headlines again!

At SMB Bearings, we are always so thrilled to hear news of our customers products & progress - it's always a delight to see how our bearings are used at the end of the line.  Touch Bionics has been a valued customer for a number of years & we're thrilled to see them hitting the headlines again!


They've been featured in the press this week quite extensively - check this article from the Daily Mail out :

Need a hand (or an arm, or a leg)? Hi-tech app controlled and 3D printed prosthetics shown off

  • Bionic hand hand so advanced it can be controlled using an app
  • Include $140,000 exoskeleton that can let paraplegics walk unaided
From app-controlled hands to strap on exoskeletons that can give mobility to those unable to walk,  the most hi-tech medical innovations in the world went on show today.
The orthopedic world congress 'OTWorld' in Leipzig, Germany, kicked off today with over 5,000 exhibitors.
Everything from bandages to entire limbs was on display, with over 20,000 experts expected to visit.
Model Claudia Breidbach presents a smartphone controlled bionic hand (i-limb) manufactured by the company Touch Bionics of Britain.
Model Claudia Breidbach presents a smartphone controlled bionic hand (i-limb) manufactured by the company Touch Bionics of Britain.
The hand can be controlled using an app but it can also pick up on muscle signals
The hand can be controlled using an app but it can also pick up on muscle signals

HOW IT WORKS

The wearer of the hand can use an app to choose one of 24 different grips.
Alternatively, the hand can be controlled by muscle signals.
Electrodes in the wrist pick up electrical impulses created by contracting muscles and these are interpreted by a computer in the back of the hand.
The computer then moves the hand into any of a series of pre-set patterns.
The event is the biggest of its type in the world.
Klaus-Jürgen Lotz, President of the German Federation of Orthopaedic Technicians Guilds, said OTWorld offers an opportunity to take a look at a unique number of treatments in one place.
 
'This kind of interdisciplinary approach is unparalleled,' he said.
'Add to that the international atmosphere – and you have indeed a unique event.'

548 exhibitors from 37 countries will be showcasing their new products, with 260 of the exhibiting companies coming from outside Germany.
They include a British prosthetic technology company has created a hand which is so advanced it can be controlled using a smartphone app.
Model Claudia Breidbach uses a smartphone controlled bionic hand (i-limb) manufactured by the company Touch Bionics of Britain , which is controlled with a special app.
Model Claudia Breidbach uses a smartphone controlled bionic hand (i-limb) manufactured by the company Touch Bionics of Britain , which is controlled with a special app.
A woman walks with a smartphone controlled bionic hand (i-limb) manufactured by the company Touch Bionics of Great Britain, during the opening day at the trade show OT World 2014 in Leipzig, Germany, Tuesday, May 13, 2014. At the center of concerns are the product groups prosthetics, orthotics, orthopaedic footwear technology, compression therapy and rehabilitation. Over 500 exhibitors and more than 20,000 trade and professional visitors from all over the world are coming to the fair. (AP Photo/Jens Meyer)
A man demonstrate a lower limb prosthesis on a skateboard promoted by the Russian company Ortokosmos, Moscow.
Gadgets ranged from the iHand to 3D printed legs (right)
Touch Bionics’ i-limb ultra revolution prosthetic hand also features a rotating thumb, five individually powered fingers, a rotatable wrist and aluminium chassis.
The company claims that this is the most dextrous prosthetic hand ever made.
The wearer of the hand can use an app to choose one of 24 different grips.
Alternatively, the hand can be controlled by muscle signals.
Electrodes in the wrist pick up electrical impulses created by contracting muscles and these are interpreted by a computer in the back of the hand.
The computer then moves the hand into any of a series of pre-set patterns.
A man walks in front of a poster which showing a bionic hand during the opening day of the orthopedic world congress 'OTWorld' in Leipzig, Germany, Tuesday, May 13, 2014.
A man walks in front of a poster which showing a bionic hand during the opening day of the orthopedic world congress 'OTWorld' in Leipzig, Germany, Tuesday, May 13, 2014.
A man demonstrate a lower limb prosthesis on a skateboard promoted by the Russian company Ortokosmos, Moscow. Over 500 exhibitors and more than 20,000 trade and professional visitors from all over the world are coming to the fair.
A man demonstrate a lower limb prosthesis on a skateboard promoted by the Russian company Ortokosmos, Moscow. Over 500 exhibitors and more than 20,000 trade and professional visitors from all over the world are coming to the fair.
It is also the first upper limb prosthesis to be created which can be controlled using an app.
It comes with an iOS app that allows the user to control the hand’s grip using their smartphone.
The app means that the wearer can choose from 24 different grips at the touch of a button.
The app can also offers training on how to best use the device and can diagnose problems with it.
However, it is not only controllable using an app – it also uses muscle signals to shift into a series of pre-set patterns.
It achieves this by using electrodes in the wrist to pick up electrical impulses created by contracting muscles, which are interpreted by a computer in the back of the hand.
People walk under dummies with smart bandages at the trade show OT World 2014 in Leipzig, Germany.
People walk under dummies with smart bandages at the trade show OT World 2014 in Leipzig, Germany.
Visitors stand besides dummies with upper limb prosthetics during the opening day at the trade show.
Visitors stand besides dummies with upper limb prosthetics during the opening day at the trade show.
A dummy with different orthopedic  is on display  in one of the halls
A dummy with different orthopedic is on display in one of the halls
Paraplegic Peter Anziano walks besides his wife Melissa Ford in an 'exoskeleton' manufactured by the US company 'Parker Hannifin Corporation' of Cleveland
Paraplegic Peter Anziano walks besides his wife Melissa Ford in an 'exoskeleton' manufactured by the US company 'Parker Hannifin Corporation' of Cleveland


Read more: http://www.dailymail.co.uk/sciencetech/article-2627412/Need-hand-arm-leg-Hi-tech-app-controlled-3D-printed-prosthetics-shown-off.html#ixzz31h4HDBME
Follow us: @MailOnline on Twitter | DailyMail on Facebook


Well done to all the amazing folks developing these products at Touch Bionics, we continue to be thrilled & amazed at your products (& excited that our bearings can be a small part of that).